logo

           Design for better working
Share to:

Workshop Traveling Eot Cranes Manufacturers

load: 1-32t
max lifting height: 30m
span: 10.5-31.5m
working class: A3-A5

Quantity:
  • LD
  • Dowell
  • 1-32tons
  • 7.5~31.5m
  • 3-30m
  • 3.5m/min or double speed
  • 20/30 m/min or 0-30m/min
  • A3~A5
  • 380v 50hz or on your request
  • According to the customer request

Workshop Traveling Eot Cranes Manufacturers

 

▶ Workshop Traveling Eot Cranes Manufacturers, commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge.

 

▶ Workshop Traveling Eot Cranes Manufacturers are commonly used in the refinement of steel and other metals such as copper and aluminium. At every step of the manufacturing process, until it leaves a factory as a finished product, metal is handled by an overhead crane. Raw materials are poured into a furnace by crane, hot metal is then rolled to specific thickness and tempered or annealed, and then stored by an overhead crane for cooling, the finished coils are lifted and loaded onto trucks and trains by overhead crane, and the fabricator or stamper uses an overhead crane to handle the steel in his factory. The automobile industry uses overhead cranes to handle raw materials. Smaller workstation cranes, such as jib cranes or gantry cranes, handle lighter loads in a work area, such as CNC mill or saw.
 

 In many instances the cost of a bridge crane can be largely offset with savings from not renting mobile cranes in the construction of a facility that uses a lot of heavy process equipment.

 

Main parts of overhead crane
 

eot-hoist    Eot wire rope Hoist: Lifting system.  Capacity is 1-32ton.                                                                                                                         
eot single girder overhead crane  The parts of electric hoist: Three- in-one lifting system, rope guide, wire rope, hook with pulley.

 

 

Workshop Traveling Eot Cranes Manufacturers
overhead crane product process

Workshop Traveling Eot Cranes Manufacturers

eot single girder overhead crane

FAQ

How can I get a precise crane offer?
To providing you a precise crane offer efficiently, please kindly provide details as following:

 Lifting capacity; material weight(unit as tonnage)

Lifting height; (unit as meter)

Crane span; the width of inquired crane(unit as meter)

Crane traveling length; when rail track/runway beam needed, traveling length shall be provided.

Working power; power source at site(unit as voltage, phase and Hz)

Can I get your crane products with customized/personalized service?

A.Yes, Dowellcrane promise customized/personalized products are available for our clients all the time. Just freely let us know your special demands about the products, our engineering team will work on that.

.What should I do if I’m not able to install the crane after buying?

A.Freely contact us. Our engineering team available for oversea service with crane installation, inspection and commissioning.

How long I can receive my crane products after my order placed?

A.Our production will be started once the payment confirmed. Below are timeline for whole procedure
Do you have any additional service on warranty?
A. Yes, we provide “DowellCrae” service about the warranty, the warranty period will extend to two (2) years, full set of spare partsand working tools will delivered with crane for future replacement and maintenance.

 

 

HTB11ZUVJFXXXXa7XpXXq6xXFXXXh

 


CONTACT

Add: Economic Development Area, XinXiang city, Henan province, China.
Phone No: 0086 0373 8506666
Mobile Phone No: 0086 17603731989 
Fax: 0086 0373 8506666
Email: info@dowellcrane.com

Copyright  2016 Dowellcrane Machinery Group. All rights reserved.  Supported by Leadong    sitemap