 |
| Quantity: | |
|---|---|
LD
Dowell
Basic Description
Design, production and inspection carry out the last issued releveant national standard, equivalently adopts some foreign criteria including FEM, DIN and IEC. Compared with the general QD bridge crane, its weight is reduced by about 15-30%, the maximum wheel pressure is reduced by about 10-35%, which can the requirements of crane for factory building structure and reduce production cost.
Product Paramenters
| PRODUCT PARAMETERS | ||
| NUMBER | ITEM | PARAMETERS |
| 1 | Span | 1-31m |
| 2 | Lifting capacity | 1-150 tons |
| 3 | Lifting height | 1-50m |
| 4 | Working level | A3-A8 |
| 5 | Crane running speed | 0-20 m/min |
| 6 | Lifting speed | 0-8 m/min |
| 7 | Certifications | CE, ISO |
| 8 | Control method | Remote control, |
| 9 | Power supply | 3P 380V 50HZ |
| 10 | Protection class | IP54, IP44 |
| 11 | Lifting mechanism | European standard Wire rope hoist |
| 12 | Model | MATE LD |
Our Advantage |
|
Prouduct details
 |  |  |
Main Beam 1.It employs bias-rail box-type structure 2.connects eith end beam by high-strength 3.bolt ensuringeasy transportation. | Hoist 1.Capacity: 1-50t 2. Protection class F class 3. Single/Double speed, with traveling trolley and reducer, drum and motor, include overload limiter switch | End Outrigger Mainly composed of anti-twisted box profiles and travel units. They can adapt to various load capacities and can becustomized according to customer requirements. |
 |  |  |
Wheel and Reducer 1.A full range of safety systems 2. Products meet international standards 3. Customized services s will meet your needs | Motor 1.The technical parameters comply 2.with standars of FEM and HMI. 3.With high rotational speed and low noise | Hook 1. Capacity: 1-450t 2. Type: Single hook, double hooks. 3. Drop Forged Hook, Plain ‘C’ type, Swiveling on Thrust Bearing, equipped with belt buckle and wire ropes sheath. |
Basic Description
Design, production and inspection carry out the last issued releveant national standard, equivalently adopts some foreign criteria including FEM, DIN and IEC. Compared with the general QD bridge crane, its weight is reduced by about 15-30%, the maximum wheel pressure is reduced by about 10-35%, which can the requirements of crane for factory building structure and reduce production cost.
Product Paramenters
| PRODUCT PARAMETERS | ||
| NUMBER | ITEM | PARAMETERS |
| 1 | Span | 1-31m |
| 2 | Lifting capacity | 1-150 tons |
| 3 | Lifting height | 1-50m |
| 4 | Working level | A3-A8 |
| 5 | Crane running speed | 0-20 m/min |
| 6 | Lifting speed | 0-8 m/min |
| 7 | Certifications | CE, ISO |
| 8 | Control method | Remote control, |
| 9 | Power supply | 3P 380V 50HZ |
| 10 | Protection class | IP54, IP44 |
| 11 | Lifting mechanism | European standard Wire rope hoist |
| 12 | Model | MATE LD |
Our Advantage |
|
Prouduct details
| | |
Main Beam 1.It employs bias-rail box-type structure 2.connects eith end beam by high-strength 3.bolt ensuringeasy transportation. | Hoist 1.Capacity: 1-50t 2. Protection class F class 3. Single/Double speed, with traveling trolley and reducer, drum and motor, include overload limiter switch | End Outrigger Mainly composed of anti-twisted box profiles and travel units. They can adapt to various load capacities and can becustomized according to customer requirements. |
| | |
Wheel and Reducer 1.A full range of safety systems 2. Products meet international standards 3. Customized services s will meet your needs | Motor 1.The technical parameters comply 2.with standars of FEM and HMI. 3.With high rotational speed and low noise | Hook 1. Capacity: 1-450t 2. Type: Single hook, double hooks. 3. Drop Forged Hook, Plain ‘C’ type, Swiveling on Thrust Bearing, equipped with belt buckle and wire ropes sheath. |
