Double beam crane application knowledge

Double beam crane application knowledge

The double girder crane is a relatively large heavy machinery. It has more requirements in all aspects of operation. Therefore, you should know more about the equipment during operation.

The equipment of the double beam crane manufacturer can realize the lifting and moving of materials and the horizontal movement. Problems during the operation may cause heavy objects to fall. Therefore, if severe wear, cracks or deformations are found in the parts such as the grab knife blade, it must be stopped immediately, and it can be put into operation again after timely maintenance and treatment to ensure safety.

In addition, the forged hooks of the equipment of the double beam crane manufacturer should have the rated lifting weight, the factory standard, the number and other signs in the low stress area. In order to prevent the decoupling phenomenon, the working level of the crane is the parameter indicating the heavy working degree of the equipment. The short hooks of the equipment of the double beam crane manufacturer are only suitable for the small lifting weight. If the lifting height is high, measures should be taken to prevent the wire rope and the spreader from rotating. At the same time, the hook should also be equipped with corresponding safety devices. When lubricating the steel wire rope of the equipment of the double beam crane manufacturer, it is forbidden to not miss the parts that are not easy to touch such as the balance pulley.